Design Lab

Design it, then prove it

One workspace for the three kinds of proving this platform needs: a part bench for the hardware, a screen-flow designer that writes its own test suite, and an acceptance check that scores a spec against its bands.

Vehicle part bench

Design parameters

Edge power · 70 W

Rubber hardness · 60 Shore A

Air channel depth · 2.5 mm

Simulated test results

Pass · 3/3

Ice clearing timeTarget ≤ 4.0 s	1.5 s
Flex fatigue lifeTarget ≥ 250 k	300 k cycles
Heater drawTarget ≤ 100 W	81 W

Results come from the bench model in this page, not from a physical rig. Use them to compare design choices, then confirm on hardware.